Awarded: Shinya KONDO

Shinya KONDO won the presentation award of The 38th Electronics Division Meeting of the Ceramic Society of Japan held in Kawasaki, Japan for his presentation on the electro-optic effect in c-domain (Ba, Sr)TiO3 thin films.

セッション発表者題目
薄膜の物性・プロセス、機能材料近藤真矢, 山田智明, 吉野正人, 長崎正雅基板拘束がcドメイン(Ba, Sr)TiO3薄膜の電気光学効果に及ぼす影響(口頭発表)
ポスターJ. Song, T. Yamada, M. Yoshino, and T. NagasakiTheoretical Comparison on Output Voltage of Resonant and Off-resonant Nanogenerators Fabricated with (001)-oriented PZT(ポスター発表)

Published: Significant effect of Mg-pressure-controlled annealing for Sb-doped Mg2Si

Our paper entitled “Significant Effect of Mg-pressure-controlled Annealing: Non-stoichiometry and Thermoelectric Properties of Mg2-δSi1-xSbx” has been published in Phys. Chem. Chem. Phys. Non-stoichiometry of Mg2−δSi1−xSbxcontrolled via Mg-pressure-controlled annealing has significant influence on the carrier concentration and other thermoelectric properties.

Citation: Phys. Chem. Chem. Phys. 20, 25939-25950 (2018).

Awarded: Shinya KONDO

Shinya KONDO won Poster Award of The 10th China-Japan Symposium on Ferroelectric Materials and Their Applications (JCFMA10) held in Inuyama, Japan for his poster “Temperature and Strain Dependences of Electro-optic Effect in c-domain (Ba, Sr)TiO3 Thin Films Fabricated by Pulsed Laser Deposition”.

Published: 2D-epitaxial growth of BST on MgO using a SrTiO3/TiO buffer layer

Our paper entitled “Strong Impact of SrTiO3/TiO2 Buffer Layer on Epitaxial Growth and Dielectric Response of Ba0.7Sr0.3TiO3 Thin Films on MgO” has been published in Jpn. J. Appl. Phys. 270-nm-thick (001)-epitaxial BST films were deposited by pulsed laser deposition on STO/TiO2-buffered MgO with a SrRuO3 bottom electrode. It was found that the insertion of SrTiO3/TiO2 buffer layer enabled a two-dimensional growth of BST film, which resulted in the out-of-plane dielectric constant exceeding 1000.

Citation: Jpn. J. Appl. Phys. 57, 0902B1 (2018).

Seminar: Dr. Cosmin Sandu, Dr. Petr Yudin

On Jun. 1, Dr. Cosmin Sandu (Swiss Federal Institute of Technology, Lausanne – EPFL) and Dr. Petr Yudin (Siberian Branch of Russian Academy of Sciences / Academy of Science of the Czech Republic) visited us and lectured on AlScN thin film growth and pyroelectric energy harvesting.

LecturerSeminar title
Dr. Cosmin Sandu (Swiss Federal Institute of Technology – Lausanne (EPFL))Growth and Complexion Formation for Ab-normal Oriented Grains in AlScN Thin Films Deposited by Sputtering
Dr. Petr Yudin (Siberian Branch of Russian Academy of Sciences / Academy of Science of the Czech Republic)Pyroelectric Energy Harvesting from a Fluid Source

Published: Influence of PLD conditions on self-assembled PZT nanorods

Our paper entitled “Influence of Deposition Conditions on Self-assembled Growth of Pb(Zr,Ti)O3 Nanorods by Pulsed Laser Deposition at Elevated Oxygen Pressure” has been published in J. Ceram. Soc. Jpn. We found that self-assembled epitaxial PZT nanorods can be grown by pulsed laser deposition (PLD) at an elevated oxygen pressure. The radius of the PZT nanorods was larger at higher substrate temperatures and longer target-substrate distances, which can be explained respectively by the enhanced surface diffusion and shadowing effect of the PLD species.

Citation: J. Ceram. Soc. Jpn. 126, 276-280 (2018).

Published: Crystallographic orientation dependences of sputtering yields

Our paper entitled “Crystallographic Orientation Dependence of the Sputtering Yields of Nickel and Copper for 4-keV Argon Ions Determined using Polycrystalline Targets” has been published in Nucl. Instr. Meth. Phys. Res. B. A novel experimental approach for revealing the crystallographic orientation dependences of sputtering yields was developed. The dependences determined experimentally were in semi-quantitative agreement with the dependences calculated using the extended Onderdelinden model, demonstrating that the non-channeling probability dominantly controls the sputtering yield.

Citation: Nucl. Instr. Meth. Phys. Res. B 418, 34-40 (2018).